Everything you need to fix your FCS fin plugs!
 |
|
||||||||||||||
{ 0 comments }
From the category archives:
Fins
Performance Core (PC) material and construction is designed to deliver the feeling of a traditional glass fin with the added performance of reduced weight. The result is a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.
 |
|
||||||||||||||
{ 0 comments }
FCS Fluid Foils Ezi Trim Longboard Fin The Ezi Trim is the ideal fin for high performance longboarding. The fins depth noticeably improves now riding on modern high-performance longboards while its reduced area gives the board more maneuverability and greater speed. The notch improves the flex in the tip, providing more forgiveness in tight arcs.
 |
|
||||||||||||||
{ 0 comments }
FCS is proud to announce the release of the GOODS-1. This versatile high performance RTM fin features a new Composite Core (CC) developed for two of the most dynamic surfers in the world; CJ and Damien Hobgood.
 |
|
||||||||||||||
{ 0 comments }
FCS S25 Simon Anderson Quad Fin Set – Medium Twenty five years after designing the thruster, Simon Anderson, one of the most influential surfer/shapers in history and innovator of the thruster, is producing quads. These FCS Quad Surfboard fins are for his small wave quad boards and serve as a true evolution of his S81 template. A very upright right fin for quick direction changes. More base and more curve in the leading and trailing edges makes for tighter turning characteristics that better suit performance surfing. Both the front and rear fins have proportionally the same outline resulting in superior handling, speed and control. The Medium template will suit small to medium surfers while the Large template will cater to larger surfers. Simon has now produced a quad fin that is sleek and proven to perform. S-25 Medium Front: Base: 4.26″ 108.0mm Depth: 4.45″ 113.0mm Area: 14.05″² 9067mm² Sweep: 35.5° S-25 Medium Rear Base: 3.96″ 101.0mm Depth: 4.14″ 105.0mm Area: 12.52″² 8076mm² Sweep: 35.5° S-25 Large Front Base: 4.41″ 112.0mm Depth: 4.67″ 117.0mm Area: 15.12″² 9756mm² Sweep: 35.0° S-25 Large Rear Base: 4.29″ 109.0mm Depth: 4.41″ 112.0mm Area: 14.22″² 9172mm² Sweep: 31.0°
 |
|
||||||||||||||
{ 0 comments }
The M Series shortboard fins by FCS are designed to be fast and smooth with better hold and more squirt through turns. The new inside foil technology offers superior drive and the flexible tip provides forgiveness and control at high speeds.The Glass Flex material combines the flex pattern of a hand-foiled fiberglass finwith the ability to mold highly technical, computer generated foils accurately. Comes with three fins and a fin key. 4.37″ base and 4.55″ depth.
 |
|
||||||||||||||
{ 0 comments }
FCS MR-TX Glass Flex Surfboard Centers Trailer Fin Set – NaturalSet of 2 Mark Richards’ twin template, FCS advanced foil plus a dynamic stabilizer in twin, super twin or fish options, these fins are a hydrodynamic evolution in fin design and performance. Evolving from scientific tank-flow testing and refined in the ocean by some of the worlds best surfers, the H-2s tempered elliptical shape and hydrodynamically optimized foil section delivers extraordinary efficiency – less drag with more speed and drive. The H-2 side fins have been toed in slightly to increase maneuverability and rail-to-rail transitions. They have significantly more cant than standard fins, pushing the fin deeper into the wave when on rail and generating more speed during carving turns. The raked leading edge enables greater control in snapping, sliding and aerial maneuvers.As board design becomes more refined, fins are emerging as the key to improved performance. Through research and development, FCS is committed to leading the evolution. The MR TX Trailer fins have an 80/20 Foil. Glass Flex has been formulated to replicate the flex and memory properties of laminated fiberglass. Its advantages over other composite fin materials include stiffness, a more positive flex pattern, and remarkable flex memory. Base: 4 3/16″ Depth: 4 10/16″ Center Base: 4 3/16″ Center Depth: 4 10/16″ Area: 14″ sweep: 36.5°
 |
|
||||||||||||||
{ 0 comments }
The new FCS SF-4 Quad fin set now comes in Performance Core! Designed by William ‘Stretch’ Riedel for a wide variety of surfers and conditions, the wide base gives quick acceleration and drive, while a full tip provides power and hold through turns. Performance Core Tri Fin set utilizes resin transfer molding, allowing for the Performance Core fins to be made stiffer with added performance and reduced weight. Sweep: 30.5 Side Base: 4.48″ Side Depth: 4.48″ Surface Area: 15.15″
 |
|
||||||||||||||
{ 0 comments }
Kelly Slater’s new fins will work for pretty much any kind of waves! The K-3 fins are perfect for down the line walls and long turns. Kelly claims that these have been his magic fin for the past 3 years!
FCS and Kelly Slater created a proven high-performance fin with a refined foil that allows efficient water flow, minimizing drag and cavitation. Slater’s K-3 fins provide plenty of drive and have the ability to draw out a long turning arc while keeping fast and smooth transitions between turns.
Dimensions
Side Fins
Base: 4.45 in. 113 mm
Depth: 4.61 in. 117 mm
Area: 15.11 in. 9750 mm²
Sweep: 34.3°
Center Fin
Base: 4.28 in. 109 mm
Depth: 4.41 in. 112 mm
Area: 14.22 in. 9172 mm²
Sweep: 31.0°
 |
|
||||||||||||||
{ 0 comments }
FCS DT PG Sidebite Longboard Fin SetThe FCS DT PG Sidebyte Fin Set is a pair of high performance longboard side bites in Donald Takayama’s template. These fins are enhanced with Performance Glass, traditional fin panel construction. Performance Glass fins are the most similar to traditional fiberglass fins. They are machine cut from a fin panel made of 4/6oz fiberglass sheets and polyester resin. The fins are then hand finished and polished. Stiff base with subtle, responsive tip flex, amazing aesthetics and proven durability. PG fins are the perfect transition fin for surfers moving from glass-on fins to FCS. Base: 3.66in. Depth: 3.74in.
 |
|
||||||||||||||
{ 0 comments }
