From the category archives:

E-Poxy Boards

Resin8 Tokoro 6’8 Semi Gun Surfboard

Resin8 Tokoro 6'8 Semi Gun Surfboard

RESIN8 surfboards use the latest in vacuum-wrapped epoxy sandwich surfboard construction technology including the most advanced methods and techniques in epoxy resin – vacuum forming – and composite material with a focus on creating superior surfboard that will perform in all conditions. While many of these materials and methods are nothing new we have continuously tested and tweaked our production methods to arrive at our current level of quality and performance.
A triple density core which is vacuum formed and fine tuned by hand. We start with a low density EPS core and wrap it with a high density foam skin. Combined with our custom formulated epoxy the resulting board is 15% lighter than a traditional polyurethane surfboard. For More info check out www.resin8usa.com

Wade Tokoro has been shaping in Hawaii for the last 22 years. He has always made boards to suit his surroundings and – due to his proximity to the legendary north shore – he is regarded as ‘THE MAN’ when it comes to making big wave surfboards. He regularly makes boards for many of the top 44 WCT surfers. Riders such as Jamie O’Brien – Bruce Irons – Mick Fanning – Joel Parkinson – Occy – Manoa Drollet – Sunny Garcia and Taj Burrows – to name just a few – all favour his boards.

Dimensions: 6’8 in. 18 1/4 in. 2 1/4 in.

Width: Tail 12 5/8 in. Nose 10 3/4 in.

Rocker: Tail 3 in. Nose 5 3/8 in.

Description: High performance mini gun. Very pulled in tail and nose – thin tucked rails. Slight single to pronounced double concave.

{ 0 comments }

Resin8 Sam Egan 6’5 Surfboard

Resin8 Sam Egan 6'5 Surfboard

RESIN8 surfboards use the latest in vacuum-wrapped epoxy sandwich surfboard construction technology including the most advanced methods and techniques in epoxy resin – vacuum forming – and composite material with a focus on creating superior surfboard that will perform in all conditions. While many of these materials and methods are nothing new we have continuously tested and tweaked our production methods to arrive at our current level of quality and performance.

A triple density core which is vacuum formed and fine tuned by hand. We start with a low density EPS core and wrap it with a high density foam skin. Combined with our custom formulated epoxy the resulting board is 15% lighter than a traditional polyurethane surfboard. For More info check out www.resin8usa.com

Sam Egan When starting a new surfboard company and you are considering shapers to approach where do you start? Well you start at the beginning of course – and who was there at the beginning? SAM EGAN…yes – the father of surfing legend Luke Egan. This master craftsman has been shaping boards for over forty years – which equates to more than 50 -000 boards made with his own bare hands. He is so bloody good that hes been voted one of the top 5 surfboard shapers in Australia by his peers and hes also been voted as one of the Top 10 best shapers on the planet.

6’5 in. X 19 5/16 in. X 2 1/2 in. is an excellent big guy performance board – and can realy be used in a wide range of conditions and size waves. Lots of rocker – so can be surfed in bigger hollower surf – but can also work well in small waves – as it has deep concaves – and is wider with full rails. Also a model that can be used by many types of surfers. (160-200 pound surfers)

{ 0 comments }

Resin8 Sam Egan 6’4 Surfboard

Resin8 Sam Egan 6'4 Surfboard

RESIN8 surfboards use the latest in vacuum-wrapped epoxy sandwich surfboard construction technology including the most advanced methods and techniques in epoxy resin – vacuum forming – and composite material with a focus on creating superior surfboard that will perform in all conditions. While many of these materials and methods are nothing new we have continuously tested and tweaked our production methods to arrive at our current level of quality and performance.

A triple density core which is vacuum formed and fine tuned by hand. We start with a low density EPS core and wrap it with a high density foam skin. Combined with our custom formulated epoxy the resulting board is 15% lighter than a traditional polyurethane surfboard. For More info check out www.resin8usa.com

Sam Egan When starting a new surfboard company and you are considering shapers to approach where do you start? Well you start at the beginning of course – and who was there at the beginning? SAM EGAN…yes – the father of surfing legend Luke Egan. This master craftsman has been shaping boards for over forty years – which equates to more than 50 -000 boards made with his own bare hands. He is so bloody good that hes been voted one of the top 5 surfboard shapers in Australia by his peers and hes also been voted as one of the Top 10 best shapers on the planet.

6’4 in. x 18 3/4 in. x 2 7/16 in. fuller rail – still high performance – wide range of surfers could use this board (160 to 200 pound surfers).

{ 0 comments }

Resin8 Sam Egan 6’2 Surfboard

Resin8 Sam Egan 6'2 Surfboard

RESIN8 surfboards use the latest in vacuum-wrapped epoxy sandwich surfboard construction technology including the most advanced methods and techniques in epoxy resin – vacuum forming – and composite material with a focus on creating superior surfboard that will perform in all conditions. While many of these materials and methods are nothing new we have continuously tested and tweaked our production methods to arrive at our current level of quality and performance.

A triple density core which is vacuum formed and fine tuned by hand. We start with a low density EPS core and wrap it with a high density foam skin. Combined with our custom formulated epoxy the resulting board is 15% lighter than a traditional polyurethane surfboard. For More info check out www.resin8usa.com

Sam Egan When starting a new surfboard company and you are considering shapers to approach where do you start? Well you start at the beginning of course – and who was there at the beginning? SAM EGAN…yes – the father of surfing legend Luke Egan. This master craftsman has been shaping boards for over forty years – which equates to more than 50 -000 boards made with his own bare hands. He is so bloody good that hes been voted one of the top 5 surfboard shapers in Australia by his peers and hes also been voted as one of the Top 10 best shapers on the planet.

6’2 in. x 18 3/8 in. x 2 5/16 in. Pro model – with slightly fuller rails – can be ridden by a wide range of surfers (155 to 190 pound surfers) – and in a wide range of conditions and sized waves.

FCS Fins

{ 0 comments }

Resin8 Sam Egan 5’11 Surfboard

Resin8 Sam Egan 5'11 Surfboard

RESIN8 surfboards use the latest in vacuum-wrapped epoxy sandwich surfboard construction technology including the most advanced methods and techniques in epoxy resin – vacuum forming – and composite material with a focus on creating superior surfboard that will perform in all conditions. While many of these materials and methods are nothing new we have continuously tested and tweaked our production methods to arrive at our current level of quality and performance.

A triple density core which is vacuum formed and fine tuned by hand. We start with a low density EPS core and wrap it with a high density foam skin. Combined with our custom formulated epoxy the resulting board is 15% lighter than a traditional polyurethane surfboard. For More info check out www.resin8usa.com

Sam Egan When starting a new surfboard company and you are considering shapers to approach where do you start? Well you start at the beginning of course – and who was there at the beginning? SAM EGAN…yes – the father of surfing legend Luke Egan. This master craftsman has been shaping boards for over forty years – which equates to more than 50 -000 boards made with his own bare hands. He is so bloody good that hes been voted one of the top 5 surfboard shapers in Australia by his peers and hes also been voted as one of the Top 10 best shapers on the planet.

5’11 in. X 19 1/8 in. X 2 3/16 in. is a very sick board – can can be used by a wide range of surfers – and in many kinds of conditions and sized waves. Bit wider outline – fuller rails but not too thick – medium rocker – nice curvy outline. This board can do it all – grovel in the small mushy stuff – but can perform wonderfuly in good medium size surf. (150 to 180 pound surfers)

{ 0 comments }

Fugu 6’4 Quad Fin Retro Fish Surfboard (Epoxy)

Our 6’4″ Quad Fin Epoxy Fugu is totally sick. It’s extra width, and thickness makes it super easy to paddle and catch waves while still being short enough to do snap turns off the top with ease. If you’re still riding your 8′ log and want something smaller, this is the board for you. You’ll be able to ride it with no problems after one or two sessions. The quad fin setup makes it very versatile and allows you to progress your surfing even more. When you first start out, put the larger pair of fins on the back towards the tail. This will keep it more stable. Once you have the board dialed up, move the larger fins to the front and you’ll feel like you’re riding a whole new, more maneuvarable board!

Manufacturer: 9 Fish Surfboards
Customer Rating:
 
List Price: Varies based on product options
Sale Price: $555.00
Availibility: View Product Availability
Buy Now

{ 0 comments }

6’6 ISLE ECORE EPOXY SHORTBOARD GREEN TAIL

A modern high performance shortboard for the imtermediate to advanced surfer. The single to double concave bottom contour makes it both fast and responsive.

Manufacturer: Isle Surfboards
Customer Rating:
 
List Price: $379.00
Sale Price: View Sale Price
Availibility: View Product Availability
Buy Now

{ 0 comments }

7’2 ISLE ECORE EPOXY SPEED EGG FUNSHAPE RED HIBISCUS

The speed egg/funshape is an easy to learn on shape, while maintaining performance. The slightly hybrid nose combined with a round tail makes it both fast and loose.

Manufacturer: Isle Surfboards
Customer Rating:
 
List Price: $419.00
Sale Price: View Sale Price
Availibility: View Product Availability
Buy Now

{ 0 comments }