From the category archives:

Short Boards


Beckersurf

{ Comments on this entry are closed }

Super Brand The Madness 5’8 Surfboard

Super Brand The Madness 5'8 Surfboard

This is Clay Marzo’s model. Clay’s board features plenty of continuous rocker throughout the board with a medium rail and single to double concave. Clay loves to take off late – go deep – and go big. This is the package of ingredients that got him there. The board was designed to be very aggressive but still forgiving. An ideal choice when you don’t know how the surf is gonna be.

Dimensions: 5’8 in. x 17 3/4 in. x 1 15/16 in.

{ 0 comments }

Rusty 6’0 in. GTR EPS Surfboard

Rusty 6'0 in. GTR EPS Surfboard

The GTR is your go to board for in.between in. swells – also known as average – everyday surf. Back foot oriented surfers will enjoy the lift – drive and skate of this small wave machine. The GTR has a deep single concave between the feet running into a slight vee flaring off the corners – helping add rail arc and complete turns. Average entry rocker – plenty of curve on the rail for tighter arcs – and finished with relatively flat tail rocker. The GTR’s tail is a little wider than average – with volume shifted back. Ride 1-3 in. shorter than your standard shortboard.

Shaped for knee to head high surf – but can handle overhead confidently.

{ 0 comments }

Rusty 5’11 in. GTR EPS Surfboard

Rusty 5'11 in. GTR EPS Surfboard

The GTR is your go to board for in.between in. swells – also known as average – everyday surf. Back foot oriented surfers will enjoy the lift – drive and skate of this small wave machine. The GTR has a deep single concave between the feet running into a slight vee flaring off the corners – helping add rail arc and complete turns. Average entry rocker – plenty of curve on the rail for tighter arcs – and finished with relatively flat tail rocker. The GTR’s tail is a little wider than average – with volume shifted back. Ride 1-3 in. shorter than your standard shortboard.

Shaped for knee to head high surf – but can handle overhead confidently.

{ 0 comments }

Rusty 5’10 in. Redline PU Surfboard

Rusty 5'10 in. Redline PU Surfboard

This is Rusty’s ‘rider approved -’ everyday high performance squashtail. Josh Kerr gravitates to this design for its versatility and precision through and above the lip. If you’re a backfoot oriented surfer GO WITH THE REDLINE. Deep single concave between the feet create drive and hold on the face. Relaxed rocker – and lower and firmer rails facilitate sensitivity and quickness.

Pull out the Redline for fast and punchy beach and reef breaks between waist and head high. Works insane in most conditions.

{ 0 comments }

Lost MonkFish 6’0 Surfboard

Lost MonkFish 6'0 Surfboard

The Monkfish is influenced by the high volume – nose to tail vee bottom MR retro models Matt Biolis himself rode a lot the last few years. Without being tied to recreating boards from the past – Matt has developed an awesome post modern redux. The nose to tail vee bottom is a great – and now mostly overlooked – design that allows for thicker – high volume boards to still be sensitive rail to rail and not surf “flat” on the water.
Vee bottoms also go through chop like a hot knife thru butter and glide smoothly in windblown slop. The thickness – extremely flat deck – and width give extreme paddle power and stability. The steep rails and forward wide point give incredible drive and the pulled in nose tip with a deceptively healthy amount of rocker allow for tight radius surfing not usually associated with “retro fish” type boards.
Now available as single wing round pin tail (for a wider range of surf) as seen under the feet of Cory Lopez surfing the “Holy Grail of surf discoveries” in the new movie 5’5 in. x 19 ¼ in. REDUX .

Dimensions: 6’0 in. x 20.52 in. x 2.5 in.

{ Comments on this entry are closed }

Super Brand 6’0 Burnside Model Surfboard

Super Brand 6'0 Burnside Model Surfboard

This model features a low entry rocker – slight single concave and fuller rails. The Burnside is an ideal all around – user friendly board for those who like a little more foam without thickening up the center too much. It works great in most conditions from waist high to overhead.

Dimensions: 6’0 in. x 18 1/4 in. x 2 3/16 in.

{ 0 comments }

Super Brand 6’0 The Toy Model Surfboard

Super Brand 6'0 The Toy Model Surfboard

This model features a wide outline – low entry rocker – slight single concave and a wide tail block. The toy was designed to make a small or weak day of surf feel like its fun and rippable. Works great in most conditions from thigh high to head high and pairs great with any other models from Super to build a full quiver for small to medium waves. You should ride this board 1 in.-3 in. shorter than your regular board.

Dimensions: 6’0 x 19 in. x 2 3/8 in.

{ 0 comments }

JS FlyBoy 6’2 in. Surfboard

JS FlyBoy 6'2 in. Surfboard

This is the most popular board in the red hot JS Industries surfboard line. It is built on feedback from their world class team and is particularly tuned to Dean Morrison’s surfing. It has a slightly flatter entry rocker with a bit of extra curve in the tail for additional looseness. This is a great board for the light to medium weight surfer who surfs fast and technically.

Dimensions: 6’2 in. x 18 3/8 in. x 2 1/4 in.

Fins: FCS System

{ 0 comments }

JS Bruce Irons Model 5’11 Surfboard

JS Bruce Irons Model 5'11 Surfboard

I wish could surf half as good as Bruce Irons… But I can’t. And I’m not gonna sit here and tell you that this board will make you surf as good as Bruce – cause it’s the surfer not the board! Not to say this isn’t a great board either. It was developed by JS for Bruce Irons or just about anyone who wants to surf a broad range of surfing conditions – and do it well. This board has a more subtle rocker throughout – and a more tweaked tail rocker for maximum speed and the capabilty for tight turns in the pocket!

Dimensions: 5’11 in. x 18 1/4 in. x 2 1/8 in.

{ 0 comments }